3D flower pot with three tulips SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A pot planted with paper flowers. A soil disc wedges in 10 mm below the rim; three flat tulips pass through its slots and stand on the base. With wall, rim band and base. Cut 255 mm tall, the pot is 61 mm across the rim, 41 mm across the base and 53 mm tall. Loose pieces.
What is in the file
| Size | 87 × 100 mm (3.43 × 3.94 in), scales to any size |
|---|---|
| Pieces | 7 separate pieces |
| Outlines to cut | 25: 7 outer edges and 18 cut-outs |
| Cut length | 953 mm at this size |
| Narrowest part | 1.3 mm at this size |
| Nodes | 204 curve and line segments |
| Also found as | Paper flower pot SVG |
Measured from the file. PNG: 1,750 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.87 × 1 in (22 × 25 mm) | 0.33 mm | 242 mm | 110 | Too fine for most machines |
| 1.74 × 2 in (44 × 51 mm) | 0.66 mm | 484 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 2.61 × 3 in (66 × 76 mm) | 0.99 mm | 726 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 3.48 × 4 in (88 × 102 mm) | 1.3 mm | 968 mm | 6 | Vinyl, card and thin sheet |
| 5.22 × 6 in (133 × 152 mm) | 2 mm | 1,452 mm | 2 | Vinyl, card and thin sheet |
| 6.96 × 8 in (177 × 203 mm) | 2.6 mm | 1,936 mm | 1 | Vinyl, card and thin sheet |
| 10.44 × 12 in (265 × 305 mm) | 4 mm | 2,905 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D flower pot SVG files
-
Square 3D flower pot planter Solid · one piece -
Six-sided 3D flower pot vase Solid · one piece -
3D flower pot to print and cut by hand Outline · 18 pieces -
3D flower pot of tulips made up, in five colours Layered · 8 pieces -
3D flower pot with a rim band Solid · 3 pieces -
3D flower pot on a saucer Solid · 5 pieces -
Tall 3D flower pot with a scalloped rim Solid · 2 pieces -
Low 3D flower pot with heart cut-outs Solid · 2 pieces
← Two mini 3D flower pots for favours All 10 3D flower pots Square 3D flower pot planter →