Two mini 3D flower pots for favours SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two small plain pots on one sheet, each a wall and a base disc: for favours, place settings or a single paper flower. Cut 155 mm tall, each pot is 45 mm across the rim, 31 mm across the base and 39 mm tall, and the sheet fits A4 or Letter card. Loose pieces.
What is in the file
| Size | 91 × 100 mm (3.59 × 3.94 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 44: 4 outer edges and 40 cut-outs |
| Cut length | 857 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 256 curve and line segments |
Measured from the file. PNG: 1,831 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.91 × 1 in (23 × 25 mm) | 0.51 mm | 218 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.82 × 2 in (46 × 51 mm) | 1 mm | 435 mm | 30 | Vinyl, card and thin sheet |
| 2.74 × 3 in (69 × 76 mm) | 1.5 mm | 653 mm | 12 | Vinyl, card and thin sheet |
| 3.65 × 4 in (93 × 102 mm) | 2 mm | 871 mm | 6 | Vinyl, card and thin sheet |
| 5.47 × 6 in (139 × 152 mm) | 3 mm | 1,306 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.3 × 8 in (185 × 203 mm) | 4.1 mm | 1,741 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.94 × 12 in (278 × 305 mm) | 6.1 mm | 2,612 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D flower pot SVG files
-
3D flower pot with three tulips Solid · 7 pieces -
Square 3D flower pot planter Solid · one piece -
Six-sided 3D flower pot vase Solid · one piece -
3D flower pot to print and cut by hand Outline · 18 pieces -
3D flower pot of tulips made up, in five colours Layered · 8 pieces -
3D flower pot with a rim band Solid · 3 pieces -
3D flower pot on a saucer Solid · 5 pieces -
Tall 3D flower pot with a scalloped rim Solid · 2 pieces
← Low 3D flower pot with heart cut-outs All 10 3D flower pots 3D flower pot with three tulips →