Free Welcome-ish SVG

Welcome-ish outline lettering SVG

Welcome-ish outline lettering, drawn as a line — Welcome-ish outline lettering. The preview is the SVG file itself.

“Welcome-ish” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 12 mm (3.94 × 0.47 in), scales to any size
Pieces	15 separate pieces
Outlines to cut	30: 15 outer edges and 15 cut-outs
Cut length	834 mm at this size
Narrowest part	0.9 mm at this size
Nodes	324 curve and line segments

Measured from the file. PNG: 2,000 × 308 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.12 in (25 × 3 mm)	0.23 mm	212 mm	380	Too fine for most machines
2 × 0.24 in (51 × 6 mm)	0.46 mm	424 mm	135	Too fine for most machines
3 × 0.36 in (76 × 9 mm)	0.69 mm	636 mm	63	Fine detail: vinyl and paper only, weed with care
4 × 0.48 in (102 × 12 mm)	0.91 mm	847 mm	34	Fine detail: vinyl and paper only, weed with care
6 × 0.72 in (152 × 18 mm)	1.4 mm	1,271 mm	13	Vinyl, card and thin sheet
8 × 0.96 in (203 × 24 mm)	1.8 mm	1,695 mm	10	Vinyl, card and thin sheet
12 × 1.44 in (305 × 37 mm)	2.7 mm	2,542 mm	7	Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome-ish SVG files

← Welcome-ish with hearts All 12 Welcome-ish designs Welcome-ish stencil plate →