Free Welcome-ish SVG

Welcome-ish in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Welcome-ish in Kaushan Script, as a solid black shape
Welcome-ish in Kaushan Script. The preview is the SVG file itself.

“Welcome-ish” set in Kaushan Script, a lively brush script. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size100 × 19 mm (3.94 × 0.74 in), scales to any size
Pieces12 separate pieces
Outlines to cut16: 12 outer edges and 4 cut-outs
Cut length573 mm at this size
Narrowest part1 mm at this size
Nodes317 curve and line segments

Measured from the file. PNG: 2,000 × 437 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.19 in (25 × 5 mm)0.25 mm146 mm310Too fine for most machines
2 × 0.37 in (51 × 9 mm)0.51 mm291 mm105Fine detail: vinyl and paper only, weed with care
3 × 0.56 in (76 × 14 mm)0.76 mm437 mm48Fine detail: vinyl and paper only, weed with care
4 × 0.75 in (102 × 19 mm)1 mm582 mm24Vinyl, card and thin sheet
6 × 1.12 in (152 × 28 mm)1.5 mm873 mm9Vinyl, card and thin sheet
8 × 1.5 in (203 × 38 mm)2 mm1,164 mm7Vinyl, card and thin sheet
12 × 2.24 in (305 × 57 mm)3 mm1,747 mm4Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome-ish SVG files

← Welcome-ish in Lobster All 13 Welcome-ish designs Welcome-ish in Lilita One →