Free Welcome-ish SVG

Welcome-ish in block capitals SVG

Welcome-ish in block capitals, as a solid black shape — Welcome-ish in block capitals. The preview is the SVG file itself.

“WELCOME-ISH” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 17 mm (3.94 × 0.69 in), scales to any size
Pieces	11 separate pieces
Outlines to cut	12: 11 outer edges and 1 cut-out
Cut length	766 mm at this size
Narrowest part	1.9 mm at this size
Nodes	138 curve and line segments

Measured from the file. PNG: 2,000 × 412 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.17 in (25 × 4 mm)	0.48 mm	195 mm	320	Too fine for most machines
2 × 0.35 in (51 × 9 mm)	0.97 mm	389 mm	110	Fine detail: vinyl and paper only, weed with care
3 × 0.52 in (76 × 13 mm)	1.4 mm	584 mm	48	Vinyl, card and thin sheet
4 × 0.7 in (102 × 18 mm)	1.9 mm	778 mm	26	Vinyl, card and thin sheet
6 × 1.04 in (152 × 27 mm)	2.9 mm	1,167 mm	9	Vinyl, card and thin sheet
8 × 1.39 in (203 × 35 mm)	3.9 mm	1,557 mm	7	Any material, including 3 mm wood and acrylic
12 × 2.09 in (305 × 53 mm)	5.8 mm	2,335 mm	5	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome-ish SVG files

← Welcome-ish in Amatic SC All 12 Welcome-ish designs Welcome-ish with a swash underline →