Free Welcome-ish SVG

Welcome-ish in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Welcome-ish in Pacifico, as a solid black shape
Welcome-ish in Pacifico. The preview is the SVG file itself.

“Welcome-ish” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 18 mm (3.94 × 0.69 in), scales to any size
Pieces4 separate pieces
Outlines to cut10: 4 outer edges and 6 cut-outs
Cut length573 mm at this size
Narrowest part1.4 mm at this size
Nodes235 curve and line segments

Measured from the file. PNG: 2,000 × 413 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.18 in (25 × 4 mm)0.36 mm146 mm320Too fine for most machines
2 × 0.35 in (51 × 9 mm)0.71 mm291 mm110Fine detail: vinyl and paper only, weed with care
3 × 0.53 in (76 × 13 mm)1.1 mm437 mm48Vinyl, card and thin sheet
4 × 0.7 in (102 × 18 mm)1.4 mm582 mm26Vinyl, card and thin sheet
6 × 1.05 in (152 × 27 mm)2.1 mm873 mm9Vinyl, card and thin sheet
8 × 1.4 in (203 × 36 mm)2.8 mm1,164 mm7Vinyl, card and thin sheet
12 × 2.1 in (305 × 53 mm)4.3 mm1,747 mm5Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome-ish SVG files

← Welcome-ish with a little house All 13 Welcome-ish designs Welcome-ish in Lobster →