Free Welcome-ish SVG

Welcome-ish in Lilita One SVG

Welcome-ish in Lilita One, as a solid black shape — Welcome-ish in Lilita One. The preview is the SVG file itself.

“Welcome-ish” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 13 mm (3.94 × 0.51 in), scales to any size
Pieces	12 separate pieces
Outlines to cut	15: 12 outer edges and 3 cut-outs
Cut length	475 mm at this size
Narrowest part	2.1 mm at this size
Nodes	196 curve and line segments

Measured from the file. PNG: 2,000 × 325 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.13 in (25 × 3 mm)	0.53 mm	121 mm	370	Fine detail: vinyl and paper only, weed with care
2 × 0.26 in (51 × 7 mm)	1.1 mm	241 mm	130	Vinyl, card and thin sheet
3 × 0.39 in (76 × 10 mm)	1.6 mm	362 mm	60	Vinyl, card and thin sheet
4 × 0.52 in (102 × 13 mm)	2.1 mm	483 mm	34	Vinyl, card and thin sheet
6 × 0.77 in (152 × 20 mm)	3.2 mm	724 mm	12	Any material, including 3 mm wood and acrylic
8 × 1.03 in (203 × 26 mm)	4.3 mm	965 mm	9	Any material, including 3 mm wood and acrylic
12 × 1.55 in (305 × 39 mm)	6.4 mm	1,448 mm	6	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome-ish SVG files

← Welcome-ish in Kaushan Script All 12 Welcome-ish designs Welcome-ish in Alfa Slab One →