Free Welcome-ish SVG

Welcome-ish stencil plate SVG

Welcome-ish stencil plate, as a solid black shape — Welcome-ish stencil plate. The preview is the SVG file itself.

A rounded plate with “WELCOME-ISH” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 28 mm (3.94 × 1.09 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	710 mm at this size
Narrowest part	1.3 mm at this size
Nodes	197 curve and line segments

Measured from the file. PNG: 2,000 × 612 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.28 in (25 × 7 mm)	0.33 mm	180 mm	250	Too fine for most machines
2 × 0.56 in (51 × 14 mm)	0.66 mm	361 mm	80	Fine detail: vinyl and paper only, weed with care
3 × 0.83 in (76 × 21 mm)	0.99 mm	541 mm	33	Fine detail: vinyl and paper only, weed with care
4 × 1.11 in (102 × 28 mm)	1.3 mm	721 mm	18	Vinyl, card and thin sheet
6 × 1.67 in (152 × 42 mm)	2 mm	1,082 mm	6	Vinyl, card and thin sheet
8 × 2.22 in (203 × 56 mm)	2.6 mm	1,443 mm	5	Vinyl, card and thin sheet
12 × 3.34 in (305 × 85 mm)	4 mm	2,164 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome-ish SVG files

← Welcome-ish outline lettering All 12 Welcome-ish designs Welcome-ish with a drop shadow →