Free Welcome-ish SVG

Welcome-ish with a little house SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Welcome-ish with a little house, as a solid black shape — Welcome-ish with a little house. The preview is the SVG file itself.

“Welcome-ish” with a little house above the words, which are set in Lobster. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size	100 × 63 mm (3.94 × 2.48 in), scales to any size
Pieces	6 separate pieces
Outlines to cut	26: 6 outer edges and 20 cut-outs
Cut length	1,048 mm at this size
Narrowest part	0.6 mm at this size
Nodes	330 curve and line segments

Measured from the file. PNG: 2,000 × 1,288 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.63 in (25 × 16 mm)	0.15 mm	266 mm	140	Too fine for most machines
2 × 1.26 in (51 × 32 mm)	0.3 mm	532 mm	40	Too fine for most machines
3 × 1.89 in (76 × 48 mm)	0.46 mm	799 mm	15	Too fine for most machines
4 × 2.52 in (102 × 64 mm)	0.61 mm	1,065 mm	8	Fine detail: vinyl and paper only, weed with care
6 × 3.78 in (152 × 96 mm)	0.91 mm	1,597 mm	3	Fine detail: vinyl and paper only, weed with care
8 × 5.04 in (203 × 128 mm)	1.2 mm	2,130 mm	2	Vinyl, card and thin sheet
12 × 7.56 in (305 × 192 mm)	1.8 mm	3,194 mm	1	Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome-ish SVG files

← Welcome-ish with a drop shadow All 13 Welcome-ish designs Welcome-ish in Pacifico →