Free Welcome-ish SVG

Welcome-ish in Alfa Slab One SVG

Welcome-ish in Alfa Slab One, as a solid black shape — Welcome-ish in Alfa Slab One. The preview is the SVG file itself.

“Welcome-ish” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 12 mm (3.94 × 0.46 in), scales to any size
Pieces	12 separate pieces
Outlines to cut	15: 12 outer edges and 3 cut-outs
Cut length	500 mm at this size
Narrowest part	1.5 mm at this size
Nodes	316 curve and line segments

Measured from the file. PNG: 2,000 × 300 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.12 in (25 × 3 mm)	0.38 mm	127 mm	380	Too fine for most machines
2 × 0.23 in (51 × 6 mm)	0.76 mm	254 mm	140	Fine detail: vinyl and paper only, weed with care
3 × 0.35 in (76 × 9 mm)	1.1 mm	381 mm	66	Vinyl, card and thin sheet
4 × 0.46 in (102 × 12 mm)	1.5 mm	508 mm	36	Vinyl, card and thin sheet
6 × 0.7 in (152 × 18 mm)	2.3 mm	762 mm	13	Vinyl, card and thin sheet
8 × 0.93 in (203 × 24 mm)	3 mm	1,016 mm	10	Any material, including 3 mm wood and acrylic
12 × 1.39 in (305 × 35 mm)	4.6 mm	1,524 mm	7	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome-ish SVG files

← Welcome-ish in Lilita One All 12 Welcome-ish designs Welcome-ish in Amatic SC →