Free Welcome-ish SVG

Welcome-ish with hearts SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Welcome-ish with hearts, as a solid black shape
Welcome-ish with hearts. The preview is the SVG file itself.

“Welcome-ish” in Lobster with a row of three hearts above the words and three below, the middle one larger. The hearts are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 45 mm (3.94 × 1.78 in), scales to any size
Pieces11 separate pieces
Outlines to cut15: 11 outer edges and 4 cut-outs
Cut length765 mm at this size
Narrowest part0.8 mm at this size
Nodes240 curve and line segments

Measured from the file. PNG: 2,000 × 948 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.45 in (25 × 12 mm)0.2 mm194 mm180Too fine for most machines
2 × 0.91 in (51 × 23 mm)0.41 mm389 mm55Too fine for most machines
3 × 1.36 in (76 × 35 mm)0.61 mm583 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.81 in (102 × 46 mm)0.81 mm777 mm12Fine detail: vinyl and paper only, weed with care
6 × 2.72 in (152 × 69 mm)1.2 mm1,166 mm4Vinyl, card and thin sheet
8 × 3.62 in (203 × 92 mm)1.6 mm1,554 mm3Vinyl, card and thin sheet
12 × 5.44 in (305 × 138 mm)2.4 mm2,332 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome-ish SVG files

← Welcome-ish with a swash underline All 13 Welcome-ish designs Welcome-ish outline lettering →