Free Welcome-ish SVG

Welcome-ish in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Welcome-ish in Lobster, as a solid black shape
Welcome-ish in Lobster. The preview is the SVG file itself.

“Welcome-ish” set in Lobster, a bold upright script. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 15 mm (3.94 × 0.59 in), scales to any size
Pieces5 separate pieces
Outlines to cut9: 5 outer edges and 4 cut-outs
Cut length584 mm at this size
Narrowest part0.8 mm at this size
Nodes188 curve and line segments

Measured from the file. PNG: 2,000 × 365 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.15 in (25 × 4 mm)0.2 mm148 mm340Too fine for most machines
2 × 0.3 in (51 × 8 mm)0.41 mm297 mm120Too fine for most machines
3 × 0.45 in (76 × 11 mm)0.61 mm445 mm54Fine detail: vinyl and paper only, weed with care
4 × 0.6 in (102 × 15 mm)0.81 mm593 mm30Fine detail: vinyl and paper only, weed with care
6 × 0.9 in (152 × 23 mm)1.2 mm890 mm11Vinyl, card and thin sheet
8 × 1.2 in (203 × 30 mm)1.6 mm1,187 mm8Vinyl, card and thin sheet
12 × 1.8 in (305 × 46 mm)2.4 mm1,780 mm6Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome-ish SVG files

← Welcome-ish in Pacifico All 13 Welcome-ish designs Welcome-ish in Kaushan Script →