Free shark SVG

Whale shark with spots SVG

Whale shark with spots, as a solid black shape — Whale shark with spots. The preview is the SVG file itself.

The biggest fish in the sea: a blunt head with a wide mouth, a long upper tail lobe and rows of round spots along its back. Cut it at full size so the spots stay crisp.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 57 mm (3.94 × 2.23 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	44: 1 outer edge and 43 cut-outs
Cut length	697 mm at this size
Narrowest part	2.1 mm at this size
Nodes	334 curve and line segments

Measured from the file. PNG: 2,000 × 1,167 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.57 in (25 × 14 mm)	0.53 mm	177 mm	150	Fine detail: vinyl and paper only, weed with care
2 × 1.13 in (51 × 29 mm)	1.1 mm	354 mm	45	Vinyl, card and thin sheet
3 × 1.7 in (76 × 43 mm)	1.6 mm	531 mm	18	Vinyl, card and thin sheet
4 × 2.27 in (102 × 58 mm)	2.1 mm	708 mm	8	Vinyl, card and thin sheet
6 × 3.4 in (152 × 86 mm)	3.2 mm	1,062 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.54 in (203 × 115 mm)	4.3 mm	1,416 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.8 in (305 × 173 mm)	6.4 mm	2,124 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shark SVG files

← Hammerhead shark from above All 16 sharks Shark head breaking the surface →