Free shark SVG

Hammerhead shark from above SVG

Hammerhead shark from above, as a solid black shape — Hammerhead shark from above. The preview is the SVG file itself.

A hammerhead seen from above: the wide flat head with an eye at each end, swept side fins, a slim body and a tail swung to one side.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	57 × 100 mm (2.23 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	422 mm at this size
Narrowest part	2.7 mm at this size
Nodes	142 curve and line segments

Measured from the file. PNG: 1,165 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.57 × 1 in (14 × 25 mm)	0.69 mm	107 mm	150	Fine detail: vinyl and paper only, weed with care
1.13 × 2 in (29 × 51 mm)	1.4 mm	214 mm	45	Vinyl, card and thin sheet
1.7 × 3 in (43 × 76 mm)	2.1 mm	322 mm	18	Vinyl, card and thin sheet
2.26 × 4 in (58 × 102 mm)	2.7 mm	429 mm	8	Vinyl, card and thin sheet
3.4 × 6 in (86 × 152 mm)	4.1 mm	643 mm	3	Any material, including 3 mm wood and acrylic
4.53 × 8 in (115 × 203 mm)	5.5 mm	858 mm	2	Any material, including 3 mm wood and acrylic
6.79 × 12 in (173 × 305 mm)	8.2 mm	1,286 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shark SVG files

← Leaping shark All 16 sharks Whale shark with spots →