Free shark SVG

Leaping shark SVG

Leaping shark, as a solid black shape — Leaping shark. The preview is the SVG file itself.

The great white arched in a jump, nose up and tail down, with its mouth open. Set it above a line of text or let it break out of a circle.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 83 mm (3.94 × 3.25 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	595 mm at this size
Narrowest part	1.5 mm at this size
Nodes	232 curve and line segments

Measured from the file. PNG: 2,000 × 1,665 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.83 in (25 × 21 mm)	0.38 mm	151 mm	110	Too fine for most machines
2 × 1.65 in (51 × 42 mm)	0.76 mm	302 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.48 in (76 × 63 mm)	1.1 mm	453 mm	12	Vinyl, card and thin sheet
4 × 3.3 in (102 × 84 mm)	1.5 mm	605 mm	6	Vinyl, card and thin sheet
6 × 4.96 in (152 × 126 mm)	2.3 mm	907 mm	2	Vinyl, card and thin sheet
8 × 6.61 in (203 × 168 mm)	3 mm	1,209 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.91 in (305 × 252 mm)	4.6 mm	1,814 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shark SVG files

← Cute cartoon shark All 16 sharks Hammerhead shark from above →