Free shark SVG

Shark fin in the water SVG

Shark fin in the water, as a solid black shape — Shark fin in the water. The preview is the SVG file itself.

A single back fin cutting through a strip of sea with one ripple line. The whole warning in one shape: for beach signs, pool party invitations and cooler lids.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 81 mm (3.94 × 3.18 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	483 mm at this size
Narrowest part	5.5 mm at this size
Nodes	94 curve and line segments

Measured from the file. PNG: 2,000 × 1,631 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.81 in (25 × 21 mm)	1.4 mm	123 mm	120	Vinyl, card and thin sheet
2 × 1.62 in (51 × 41 mm)	2.8 mm	245 mm	30	Vinyl, card and thin sheet
3 × 2.42 in (76 × 62 mm)	4.2 mm	368 mm	12	Any material, including 3 mm wood and acrylic
4 × 3.23 in (102 × 82 mm)	5.6 mm	491 mm	6	Any material, including 3 mm wood and acrylic
6 × 4.85 in (152 × 123 mm)	8.4 mm	736 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.46 in (203 × 164 mm)	11 mm	981 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.7 in (305 × 246 mm)	17 mm	1,472 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shark SVG files

← Shark face from the front All 16 sharks Shark tail above the water →