Free shark SVG

Great white shark SVG

Great white shark, as a solid black shape — Great white shark. The preview is the SVG file itself.

A great white in side view: pointed snout, open mouth with a row of teeth on each jaw, four gill slits, a tall back fin and a crescent tail. One piece, facing right.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 57 mm (3.94 × 2.24 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	541 mm at this size
Narrowest part	1.3 mm at this size
Nodes	230 curve and line segments

Measured from the file. PNG: 2,000 × 1,171 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.57 in (25 × 14 mm)	0.33 mm	137 mm	150	Too fine for most machines
2 × 1.14 in (51 × 29 mm)	0.66 mm	275 mm	45	Fine detail: vinyl and paper only, weed with care
3 × 1.71 in (76 × 43 mm)	0.99 mm	412 mm	18	Fine detail: vinyl and paper only, weed with care
4 × 2.28 in (102 × 58 mm)	1.3 mm	550 mm	8	Vinyl, card and thin sheet
6 × 3.41 in (152 × 87 mm)	2 mm	824 mm	3	Vinyl, card and thin sheet
8 × 4.55 in (203 × 116 mm)	2.6 mm	1,099 mm	2	Vinyl, card and thin sheet
12 × 6.83 in (305 × 173 mm)	4 mm	1,649 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shark SVG files

← Three circling sharks All 16 sharks Shark silhouette →