Free shark SVG

Shark silhouette SVG

Shark silhouette, as a solid black shape — Shark silhouette. The preview is the SVG file itself.

A shark as a solid shape with no inside cuts, facing left and arched as if turning. The plain one for small decals, stencils and anything cut from thick material.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 55 mm (3.94 × 2.18 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	323 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	124 curve and line segments

Measured from the file. PNG: 2,000 × 1,140 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.55 in (25 × 14 mm)	Over 1.5 mm	82 mm	160	Vinyl, card and thin sheet
2 × 1.11 in (51 × 28 mm)	Over 3 mm	164 mm	45	Any material, including 3 mm wood and acrylic
3 × 1.66 in (76 × 42 mm)	Over 4.6 mm	246 mm	18	Any material, including 3 mm wood and acrylic
4 × 2.21 in (102 × 56 mm)	Over 6.1 mm	328 mm	10	Any material, including 3 mm wood and acrylic
6 × 3.32 in (152 × 84 mm)	Over 9.1 mm	492 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.42 in (203 × 112 mm)	Over 12 mm	656 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.64 in (305 × 169 mm)	Over 18 mm	985 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shark SVG files

← Great white shark All 16 sharks Shark outline →