Free shark SVG

Shark outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Shark outline, drawn as a line
Shark outline. The preview is the SVG file itself.

The shark drawn as an even line, with the mouth, a line down its side and four gill slits joined to it. The eye is a loose dot. For colouring pages, foil and pen plotters.

What is in the file

Size100 × 58 mm (3.94 × 2.26 in), scales to any size
Pieces2 separate pieces
Outlines to cut4: 2 outer edges and 2 cut-outs
Cut length870 mm at this size
Narrowest part1.6 mm at this size
Nodes277 curve and line segments

Measured from the file. PNG: 2,000 × 1,183 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.58 in (25 × 15 mm)0.41 mm221 mm150Too fine for most machines
2 × 1.15 in (51 × 29 mm)0.81 mm442 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.73 in (76 × 44 mm)1.2 mm663 mm18Vinyl, card and thin sheet
4 × 2.3 in (102 × 58 mm)1.6 mm884 mm8Vinyl, card and thin sheet
6 × 3.45 in (152 × 88 mm)2.4 mm1,326 mm3Vinyl, card and thin sheet
8 × 4.6 in (203 × 117 mm)3.3 mm1,768 mm2Any material, including 3 mm wood and acrylic
12 × 6.9 in (305 × 175 mm)4.9 mm2,652 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shark SVG files

← Shark silhouette All 16 sharks Cute cartoon shark →