Free shark SVG

Open shark jaws SVG

Open shark jaws, as a solid black shape — Open shark jaws. The preview is the SVG file itself.

A set of jaws seen from the front, like the ones hung on a beach bar wall: a broad arch of bone with nine teeth above and nine below, pointing into the opening.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 86 mm (3.94 × 3.39 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	732 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	189 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,735 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.86 in (25 × 22 mm)	Over 1.5 mm	186 mm	110	Vinyl, card and thin sheet
2 × 1.72 in (51 × 44 mm)	Over 3 mm	372 mm	30	Any material, including 3 mm wood and acrylic
3 × 2.59 in (76 × 66 mm)	Over 4.6 mm	558 mm	12	Any material, including 3 mm wood and acrylic
4 × 3.45 in (102 × 88 mm)	Over 6.1 mm	744 mm	6	Any material, including 3 mm wood and acrylic
6 × 5.17 in (152 × 131 mm)	Over 9.1 mm	1,116 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.9 in (203 × 175 mm)	Over 12 mm	1,487 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.34 in (305 × 263 mm)	Over 18 mm	2,231 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shark SVG files

← Five shark teeth All 16 sharks Surfboard with a shark bite →