Five shark teeth SVG
Five loose fossil teeth laid out like a beachcomber’s find: a broad one in the middle, two curved ones beside it and two slim needles at the ends. For necklaces, jar labels and collection boxes.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 36 mm (3.94 × 1.42 in), scales to any size |
|---|---|
| Pieces | 5 separate pieces |
| Outlines to cut | 6: 5 outer edges and 1 cut-out |
| Cut length | 422 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 139 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 769 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.36 in (25 × 9 mm) | 0.51 mm | 107 mm | 210 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.72 in (51 × 18 mm) | 1 mm | 214 mm | 65 | Vinyl, card and thin sheet |
| 3 × 1.08 in (76 × 27 mm) | 1.5 mm | 322 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.44 in (102 × 37 mm) | 2 mm | 429 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.16 in (152 × 55 mm) | 3 mm | 643 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.88 in (203 × 73 mm) | 4.1 mm | 858 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.32 in (305 × 110 mm) | 6.1 mm | 1,286 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Open shark jaws 
Surfboard with a shark bite 
Three circling sharks 
Great white shark 
Shark silhouette 
Shark outline 
Cute cartoon shark 
Leaping shark 