Free shark SVG

Shark tooth SVG

Shark tooth, as a solid black shape — Shark tooth. The preview is the SVG file itself.

A fossil tooth, point down: two rounded root lobes, a broad triangular blade and a V-shaped band where they meet. Add a hole in the root to hang it as a pendant.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	68 × 100 mm (2.68 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	366 mm at this size
Narrowest part	5.4 mm at this size
Nodes	45 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,387 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.68 × 1 in (17 × 25 mm)	1.4 mm	93 mm	130	Vinyl, card and thin sheet
1.36 × 2 in (35 × 51 mm)	2.7 mm	186 mm	35	Vinyl, card and thin sheet
2.04 × 3 in (52 × 76 mm)	4.1 mm	279 mm	15	Any material, including 3 mm wood and acrylic
2.72 × 4 in (69 × 102 mm)	5.5 mm	372 mm	8	Any material, including 3 mm wood and acrylic
4.09 × 6 in (104 × 152 mm)	8.2 mm	558 mm	2	Any material, including 3 mm wood and acrylic
5.45 × 8 in (138 × 203 mm)	11 mm	744 mm	2	Any material, including 3 mm wood and acrylic
8.17 × 12 in (208 × 305 mm)	16 mm	1,116 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shark SVG files

← Shark tail above the water All 16 sharks Five shark teeth →