Free scorpion SVG

Striking scorpion SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Striking scorpion, as a solid black shape
Striking scorpion. The preview is the SVG file itself.

A scorpion about to strike, seen from the side: the tail whipped forward over its head, one pincer low and the other raised. A solid shape with an eye, for desert and Halloween projects.

What is in the file

Size100 × 72 mm (3.94 × 2.83 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length662 mm at this size
Narrowest part1.9 mm at this size
Nodes326 curve and line segments

Measured from the file. PNG: 2,000 × 1,460 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.72 in (25 × 18 mm)0.48 mm168 mm130Too fine for most machines
2 × 1.44 in (51 × 37 mm)0.97 mm336 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.16 in (76 × 55 mm)1.4 mm504 mm15Vinyl, card and thin sheet
4 × 2.88 in (102 × 73 mm)1.9 mm673 mm6Vinyl, card and thin sheet
6 × 4.31 in (152 × 110 mm)2.9 mm1,009 mm2Vinyl, card and thin sheet
8 × 5.75 in (203 × 146 mm)3.9 mm1,345 mm2Any material, including 3 mm wood and acrylic
12 × 8.63 in (305 × 219 mm)5.8 mm2,018 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scorpion SVG files

← Scorpion silhouette All 12 scorpions Scorpion with a straight tail →