Scorpion with a straight tail SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A scorpion from above with its tail laid out straight behind it and the sting pointing back, so that the whole design is exactly symmetrical. A plain solid shape, longer than it is wide.
What is in the file
| Size | 57 × 100 mm (2.23 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 1 outline |
| Cut length | 653 mm at this size |
| Narrowest part | 3.4 mm at this size |
| Nodes | 374 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,165 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.57 × 1 in (14 × 25 mm) | 0.86 mm | 166 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 1.13 × 2 in (29 × 51 mm) | 1.7 mm | 332 mm | 45 | Vinyl, card and thin sheet |
| 1.7 × 3 in (43 × 76 mm) | 2.6 mm | 498 mm | 18 | Vinyl, card and thin sheet |
| 2.26 × 4 in (58 × 102 mm) | 3.5 mm | 663 mm | 8 | Any material, including 3 mm wood and acrylic |
| 3.4 × 6 in (86 × 152 mm) | 5.2 mm | 995 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.53 × 8 in (115 × 203 mm) | 6.9 mm | 1,327 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.79 × 12 in (173 × 305 mm) | 10 mm | 1,990 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More scorpion SVG files
-
Scattered scorpions Solid · 3 pieces
-
Two scorpions face to face Solid · one piece
-
Scorpion in a ring Solid · one piece
-
Scorpion in the desert Solid · one piece
-
Scorpion tail and stinger Solid · one piece
-
Scorpion monogram frame Solid · one piece
-
Scorpion outline Outline · one piece
-
Layered scorpion in three colours Layered · 11 pieces