Free scorpion SVG

Scorpion in a ring SVG

Scorpion in a ring. The preview is the SVG file itself.

The scorpion from above set inside a round frame, with its pincers, its legs and the curl of its tail all reaching the ring so that the badge holds together as one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	18: 1 outer edge and 17 cut-outs
Cut length	1,528 mm at this size
Narrowest part	1.5 mm at this size
Nodes	564 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.38 mm	388 mm	100	Too fine for most machines
2 × 2 in (51 × 51 mm)	0.76 mm	776 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)	1.1 mm	1,164 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	1.5 mm	1,552 mm	4	Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)	2.3 mm	2,329 mm	1	Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)	3 mm	3,105 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	4.6 mm	4,657 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scorpion SVG files

← Two scorpions face to face All 12 scorpions Scorpion in the desert →