Free scorpion SVG

Scorpion from above SVG

Scorpion from above, as a solid black shape — Scorpion from above. The preview is the SVG file itself.

A scorpion seen from above: two arms with open pincers, eight jointed legs, a body cut with six rings and a tail of five beads that curls round to one side and ends in a hooked sting.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	69 × 100 mm (2.72 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	1,012 mm at this size
Narrowest part	1.4 mm at this size
Nodes	524 curve and line segments

Measured from the file. PNG: 1,408 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.69 × 1 in (18 × 25 mm)	0.36 mm	257 mm	130	Too fine for most machines
1.38 × 2 in (35 × 51 mm)	0.71 mm	514 mm	35	Fine detail: vinyl and paper only, weed with care
2.08 × 3 in (53 × 76 mm)	1.1 mm	771 mm	15	Vinyl, card and thin sheet
2.77 × 4 in (70 × 102 mm)	1.4 mm	1,028 mm	8	Vinyl, card and thin sheet
4.15 × 6 in (105 × 152 mm)	2.1 mm	1,542 mm	2	Vinyl, card and thin sheet
5.54 × 8 in (141 × 203 mm)	2.8 mm	2,056 mm	2	Vinyl, card and thin sheet
8.3 × 12 in (211 × 305 mm)	4.3 mm	3,085 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scorpion SVG files

← Layered scorpion in three colours All 12 scorpions Scorpion silhouette →