Free scorpion SVG

Scorpion tail and stinger SVG

Scorpion tail and stinger, as a solid black shape — Scorpion tail and stinger. The preview is the SVG file itself.

The tail on its own, large: five beads in a curve that shrink as they climb, a bulb at the end and a long hooked sting. Put it behind a name, on the back of a jacket or along a helmet.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	97 × 100 mm (3.83 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	484 mm at this size
Narrowest part	2.5 mm at this size
Nodes	160 curve and line segments

Measured from the file. PNG: 1,950 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.97 × 1 in (25 × 25 mm)	0.64 mm	123 mm	100	Fine detail: vinyl and paper only, weed with care
1.95 × 2 in (49 × 51 mm)	1.3 mm	246 mm	25	Vinyl, card and thin sheet
2.92 × 3 in (74 × 76 mm)	1.9 mm	369 mm	9	Vinyl, card and thin sheet
3.9 × 4 in (99 × 102 mm)	2.5 mm	492 mm	4	Vinyl, card and thin sheet
5.84 × 6 in (148 × 152 mm)	3.8 mm	738 mm	2	Any material, including 3 mm wood and acrylic
7.79 × 8 in (198 × 203 mm)	5.1 mm	983 mm	1	Any material, including 3 mm wood and acrylic
11.69 × 12 in (297 × 305 mm)	7.6 mm	1,475 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scorpion SVG files

← Scorpion in the desert All 12 scorpions Scorpion monogram frame →