Free scorpion SVG

Scorpion silhouette SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Scorpion silhouette, as a solid black shape
Scorpion silhouette. The preview is the SVG file itself.

A scorpion from the side, standing on four legs with their tips on the ground: both pincers held out in front and the tail arched up over its back with the sting pointing forward. Nothing to weed.

What is in the file

Size100 × 76 mm (3.94 × 2.98 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length601 mm at this size
Narrowest part1 mm at this size
Nodes319 curve and line segments

Measured from the file. PNG: 2,000 × 1,535 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.76 in (25 × 19 mm)0.25 mm153 mm120Too fine for most machines
2 × 1.52 in (51 × 39 mm)0.51 mm305 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.27 in (76 × 58 mm)0.76 mm458 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.03 in (102 × 77 mm)1 mm611 mm6Vinyl, card and thin sheet
6 × 4.55 in (152 × 116 mm)1.5 mm916 mm2Vinyl, card and thin sheet
8 × 6.06 in (203 × 154 mm)2 mm1,221 mm1Vinyl, card and thin sheet
12 × 9.1 in (305 × 231 mm)3 mm1,832 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scorpion SVG files

← Scorpion from above All 12 scorpions Striking scorpion →