Free scorpion SVG

Scorpion monogram frame SVG

Scorpion monogram frame, as a solid black shape — Scorpion monogram frame. The preview is the SVG file itself.

A round frame with a scorpion standing on top of the ring, tail arched and pincers out. The middle is empty for an initial or a zodiac date: add it so that it touches the ring, and weld.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	60 × 100 mm (2.35 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	679 mm at this size
Narrowest part	1.5 mm at this size
Nodes	281 curve and line segments

Measured from the file. PNG: 1,227 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.6 × 1 in (15 × 25 mm)	0.38 mm	172 mm	150	Too fine for most machines
1.2 × 2 in (30 × 51 mm)	0.76 mm	345 mm	40	Fine detail: vinyl and paper only, weed with care
1.79 × 3 in (46 × 76 mm)	1.1 mm	517 mm	18	Vinyl, card and thin sheet
2.39 × 4 in (61 × 102 mm)	1.5 mm	690 mm	8	Vinyl, card and thin sheet
3.59 × 6 in (91 × 152 mm)	2.3 mm	1,035 mm	3	Vinyl, card and thin sheet
4.78 × 8 in (122 × 203 mm)	3 mm	1,380 mm	2	Any material, including 3 mm wood and acrylic
7.18 × 12 in (182 × 305 mm)	4.6 mm	2,070 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scorpion SVG files

← Scorpion tail and stinger All 12 scorpions Scorpion outline →