Free scorpion SVG

Two scorpions face to face SVG

Two scorpions face to face, as a solid black shape — Two scorpions face to face. The preview is the SVG file itself.

Two scorpions squaring up on a strip of ground, pincers almost touching and tails arched, each the mirror image of the other. One piece, for a border, a belt design or a desert sign.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 53 mm (3.94 × 2.09 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	818 mm at this size
Narrowest part	2.1 mm at this size
Nodes	483 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,100 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.53 in (25 × 14 mm)	0.53 mm	208 mm	160	Fine detail: vinyl and paper only, weed with care
2 × 1.06 in (51 × 27 mm)	1.1 mm	416 mm	45	Vinyl, card and thin sheet
3 × 1.6 in (76 × 41 mm)	1.6 mm	623 mm	18	Vinyl, card and thin sheet
4 × 2.13 in (102 × 54 mm)	2.1 mm	831 mm	10	Vinyl, card and thin sheet
6 × 3.19 in (152 × 81 mm)	3.2 mm	1,247 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.26 in (203 × 108 mm)	4.3 mm	1,662 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.38 in (305 × 162 mm)	6.4 mm	2,493 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scorpion SVG files

← Scattered scorpions All 12 scorpions Scorpion in a ring →