Free scorpion SVG

Scorpion outline SVG

Scorpion outline, drawn as a line — Scorpion outline. The preview is the SVG file itself.

The scorpion from above drawn as one even line about 2 mm wide round every leg, pincer and bead of the tail. For colouring pages, foil, engraving, pen plotters and tattoo stencils.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	69 × 100 mm (2.72 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	1,179 mm at this size
Narrowest part	1.8 mm at this size
Nodes	624 curve and line segments

Measured from the file. PNG: 1,408 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.69 × 1 in (18 × 25 mm)	0.46 mm	299 mm	130	Too fine for most machines
1.38 × 2 in (35 × 51 mm)	0.91 mm	599 mm	35	Fine detail: vinyl and paper only, weed with care
2.08 × 3 in (53 × 76 mm)	1.4 mm	898 mm	15	Vinyl, card and thin sheet
2.77 × 4 in (70 × 102 mm)	1.8 mm	1,198 mm	8	Vinyl, card and thin sheet
4.15 × 6 in (105 × 152 mm)	2.7 mm	1,797 mm	2	Vinyl, card and thin sheet
5.54 × 8 in (141 × 203 mm)	3.7 mm	2,396 mm	2	Any material, including 3 mm wood and acrylic
8.3 × 12 in (211 × 305 mm)	5.5 mm	3,594 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scorpion SVG files

← Scorpion monogram frame All 12 scorpions Layered scorpion in three colours →