Free Santa SVG

Santa boots SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Santa boots, as a solid black shape
Santa boots. The preview is the SVG file itself.

A pair of tall boots standing heel to heel with their toes turned out: fur cuffs, a buckled strap on each and a line for the sole. Stand them by a fireplace sign or on a stocking.

What is in the file

Size100 × 67 mm (3.94 × 2.65 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length829 mm at this size
Narrowest part1.4 mm at this size
Nodes133 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,369 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.67 in (25 × 17 mm)0.36 mm211 mm130Too fine for most machines
2 × 1.34 in (51 × 34 mm)0.71 mm421 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.02 in (76 × 51 mm)1.1 mm632 mm15Vinyl, card and thin sheet
4 × 2.69 in (102 × 68 mm)1.4 mm842 mm8Vinyl, card and thin sheet
6 × 4.03 in (152 × 102 mm)2.1 mm1,263 mm2Vinyl, card and thin sheet
8 × 5.38 in (203 × 137 mm)2.8 mm1,685 mm2Vinyl, card and thin sheet
12 × 8.06 in (305 × 205 mm)4.3 mm2,527 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa SVG files

← Santa sleigh with a sack All 16 Santas Santa footprint →