Santa belt with a buckle SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A wide belt with a square buckle and prong, three punched holes and a pointed tip. Wrap it round a jar, a bottle, a gift box or the middle of a red shirt.
What is in the file
| Size | 100 × 29 mm (3.94 × 1.13 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 405 mm at this size |
| Narrowest part | 3.4 mm at this size |
| Nodes | 62 curve and line segments |
Measured from the file. PNG: 2,000 × 631 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.29 in (25 × 7 mm) | 0.86 mm | 103 mm | 250 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.58 in (51 × 15 mm) | 1.7 mm | 206 mm | 75 | Vinyl, card and thin sheet |
| 3 × 0.86 in (76 × 22 mm) | 2.6 mm | 309 mm | 33 | Vinyl, card and thin sheet |
| 4 × 1.15 in (102 × 29 mm) | 3.5 mm | 411 mm | 18 | Any material, including 3 mm wood and acrylic |
| 6 × 1.73 in (152 × 44 mm) | 5.2 mm | 617 mm | 6 | Any material, including 3 mm wood and acrylic |
| 8 × 2.3 in (203 × 59 mm) | 6.9 mm | 823 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 3.46 in (305 × 88 mm) | 10 mm | 1,234 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Santa SVG files
-
Santa suit with boots Solid · one piece
-
Santa beard and moustache Solid · one piece
-
Peeking Santa Solid · one piece
-
Santa stuck in a chimney Solid · one piece
-
Santa face with hat and beard Solid · one piece
-
Santa head with round glasses Solid · one piece
-
Cool Santa in sunglasses Solid · one piece
-
Santa Claus standing Solid · one piece
← Santa boot prints, left and right All 16 Santas Santa suit with boots →