Free Santa SVG

Santa beard and moustache SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Santa beard and moustache, as a solid black shape
Santa beard and moustache. The preview is the SVG file itself.

A full scalloped beard with a curling moustache and an open mouth, and nothing else. Hold it up for photos, stick it on a mask or a mug, or pair it with any hat.

What is in the file

Size100 × 76 mm (3.94 × 2.98 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length584 mm at this size
Narrowest part1.4 mm at this size
Nodes127 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,533 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.76 in (25 × 19 mm)0.36 mm148 mm120Too fine for most machines
2 × 1.51 in (51 × 38 mm)0.71 mm297 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.27 in (76 × 58 mm)1.1 mm445 mm12Vinyl, card and thin sheet
4 × 3.03 in (102 × 77 mm)1.4 mm593 mm6Vinyl, card and thin sheet
6 × 4.54 in (152 × 115 mm)2.1 mm890 mm2Vinyl, card and thin sheet
8 × 6.06 in (203 × 154 mm)2.8 mm1,187 mm1Vinyl, card and thin sheet
12 × 9.08 in (305 × 231 mm)4.3 mm1,780 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa SVG files

← Santa suit with boots All 16 Santas Peeking Santa →