Free Santa SVG

Santa Claus standing SVG

Santa Claus standing, as a solid black shape — Santa Claus standing. The preview is the SVG file itself.

The whole of Father Christmas, facing you: hat, beard, belted coat with a buckle, fur cuffs and hem, mittens and boots, with one arm raised in a wave. Seams are cut as thin lines and it stays in one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	71 × 100 mm (2.81 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	19: 1 outer edge and 18 cut-outs
Cut length	940 mm at this size
Narrowest part	1.6 mm at this size
Nodes	392 curve and line segments

Measured from the file. PNG: 1,448 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.71 × 1 in (18 × 25 mm)	0.41 mm	239 mm	130	Too fine for most machines
1.43 × 2 in (36 × 51 mm)	0.81 mm	478 mm	35	Fine detail: vinyl and paper only, weed with care
2.14 × 3 in (54 × 76 mm)	1.2 mm	716 mm	15	Vinyl, card and thin sheet
2.85 × 4 in (72 × 102 mm)	1.6 mm	955 mm	6	Vinyl, card and thin sheet
4.28 × 6 in (109 × 152 mm)	2.4 mm	1,433 mm	2	Vinyl, card and thin sheet
5.7 × 8 in (145 × 203 mm)	3.3 mm	1,910 mm	2	Any material, including 3 mm wood and acrylic
8.56 × 12 in (217 × 305 mm)	4.9 mm	2,865 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa SVG files

← Cool Santa in sunglasses All 16 Santas Santa silhouette with a sack →