Free Santa SVG

Santa boot prints, left and right SVG

Santa boot prints, left and right, as a solid black shape — Santa boot prints, left and right. The preview is the SVG file itself.

A left and a right boot print set as a pair of steps, four loose pieces in all. Repeat them across the floor from the fireplace to the tree.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	86 × 100 mm (3.37 × 3.94 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	18: 4 outer edges and 14 cut-outs
Cut length	1,083 mm at this size
Narrowest part	3.3 mm at this size
Nodes	102 curve and line segments

Measured from the file. PNG: 1,723 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.86 × 1 in (22 × 25 mm)	0.84 mm	275 mm	110	Fine detail: vinyl and paper only, weed with care
1.71 × 2 in (43 × 51 mm)	1.7 mm	550 mm	30	Vinyl, card and thin sheet
2.57 × 3 in (65 × 76 mm)	2.5 mm	825 mm	12	Vinyl, card and thin sheet
3.42 × 4 in (87 × 102 mm)	3.4 mm	1,100 mm	6	Any material, including 3 mm wood and acrylic
5.14 × 6 in (130 × 152 mm)	5 mm	1,650 mm	2	Any material, including 3 mm wood and acrylic
6.85 × 8 in (174 × 203 mm)	6.7 mm	2,201 mm	1	Any material, including 3 mm wood and acrylic
10.27 × 12 in (261 × 305 mm)	10 mm	3,301 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa SVG files

← Santa footprint All 16 Santas Santa belt with a buckle →