Free Santa SVG

Santa suit with boots SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Santa suit with boots, as a solid black shape
Santa suit with boots. The preview is the SVG file itself.

The suit with no one in it: a fur collar, sleeves with fur cuffs, a belt with a buckle, a fur strip down the front, a fur hem, trousers and boots. For bibs, baby vests, treat bags and aprons.

What is in the file

Size100 × 86 mm (3.94 × 3.37 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length954 mm at this size
Narrowest part1 mm at this size
Nodes428 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,723 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.86 in (25 × 22 mm)0.25 mm242 mm110Too fine for most machines
2 × 1.71 in (51 × 43 mm)0.51 mm485 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.57 in (76 × 65 mm)0.76 mm727 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.42 in (102 × 87 mm)1 mm969 mm6Vinyl, card and thin sheet
6 × 5.14 in (152 × 130 mm)1.5 mm1,454 mm2Vinyl, card and thin sheet
8 × 6.85 in (203 × 174 mm)2 mm1,939 mm1Vinyl, card and thin sheet
12 × 10.27 in (305 × 261 mm)3 mm2,908 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa SVG files

← Santa belt with a buckle All 16 Santas Santa beard and moustache →