Free Santa SVG

Santa face with hat and beard SVG

Santa face with hat and beard, as a solid black shape
Santa face with hat and beard. The preview is the SVG file itself.

Santa from the front: a floppy hat with a fur brim and pompom, two eyes, a round nose on a curling moustache, an open mouth and a full scalloped beard. One piece, with thin seams where fur meets cloth.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size71 × 100 mm (2.79 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut13: 1 outer edge and 12 cut-outs
Cut length790 mm at this size
Narrowest part2.3 mm at this size
Nodes188 curve and line segments

Measured from the file. PNG: 1,438 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.71 × 1 in (18 × 25 mm)0.58 mm201 mm130Fine detail: vinyl and paper only, weed with care
1.42 × 2 in (36 × 51 mm)1.2 mm401 mm35Vinyl, card and thin sheet
2.12 × 3 in (54 × 76 mm)1.8 mm602 mm15Vinyl, card and thin sheet
2.83 × 4 in (72 × 102 mm)2.3 mm803 mm8Vinyl, card and thin sheet
4.25 × 6 in (108 × 152 mm)3.5 mm1,204 mm2Any material, including 3 mm wood and acrylic
5.66 × 8 in (144 × 203 mm)4.7 mm1,605 mm2Any material, including 3 mm wood and acrylic
8.5 × 12 in (216 × 305 mm)7 mm2,408 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa SVG files

← Santa stuck in a chimney All 16 Santas Santa head with round glasses →