Santa in his sleigh with a reindeer SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Santa sitting in a sleigh, hat streaming behind him, holding the reins of a leaping reindeer. The reins and the harness join everything, so the scene cuts as one piece.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 69 mm (3.94 × 2.71 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 695 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 387 curve and line segments |
| Also found as | Santa and reindeer SVG |
Measured from the file. PNG: 2,000 × 1,402 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.69 in (25 × 18 mm) | 0.25 mm | 177 mm | 130 | Too fine for most machines |
| 2 × 1.38 in (51 × 35 mm) | 0.51 mm | 353 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.07 in (76 × 53 mm) | 0.76 mm | 530 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.76 in (102 × 70 mm) | 1 mm | 706 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.13 in (152 × 105 mm) | 1.5 mm | 1,059 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.51 in (203 × 140 mm) | 2 mm | 1,412 mm | 2 | Vinyl, card and thin sheet |
| 12 × 8.27 in (305 × 210 mm) | 3 mm | 2,118 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Santa SVG files
-
Santa and sleigh Solid · one piece
-
Santa sleigh with a sack Solid · one piece
-
Santa boots Solid · one piece
-
Santa footprint Solid · 2 pieces
-
Santa boot prints, left and right Solid · 4 pieces
-
Santa belt with a buckle Solid · one piece
-
Santa suit with boots Solid · one piece
-
Santa beard and moustache Solid · one piece
← Santa silhouette with a sack All 16 Santas Santa and sleigh →