Free Santa SVG

Santa stuck in a chimney SVG

Santa stuck in a chimney, as a solid black shape
Santa stuck in a chimney. The preview is the SVG file itself.

A brick chimney with two legs and a pair of boots waving out of the top. The bricks are holes, so the chimney is one piece and the red or brown behind shows through.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size68 × 100 mm (2.67 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut18: 1 outer edge and 17 cut-outs
Cut length1,001 mm at this size
Narrowest part2.4 mm at this size
Nodes205 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,383 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.68 × 1 in (17 × 25 mm)0.61 mm254 mm130Fine detail: vinyl and paper only, weed with care
1.36 × 2 in (34 × 51 mm)1.2 mm509 mm35Vinyl, card and thin sheet
2.04 × 3 in (52 × 76 mm)1.8 mm763 mm15Vinyl, card and thin sheet
2.72 × 4 in (69 × 102 mm)2.4 mm1,017 mm8Vinyl, card and thin sheet
4.07 × 6 in (103 × 152 mm)3.7 mm1,526 mm2Any material, including 3 mm wood and acrylic
5.43 × 8 in (138 × 203 mm)4.9 mm2,034 mm2Any material, including 3 mm wood and acrylic
8.15 × 12 in (207 × 305 mm)7.3 mm3,051 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa SVG files

← Peeking Santa All 16 Santas Santa face with hat and beard →