Free Santa SVG

Peeking Santa SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Peeking Santa, as a solid black shape
Peeking Santa. The preview is the SVG file itself.

Santa looking over a ledge: his hat with its fur brim and his two eyes, with a mitten either side. Sit the flat edge on a shelf, a pocket, a frame or the top of a sign.

What is in the file

Size100 × 79 mm (3.94 × 3.12 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length673 mm at this size
Narrowest part2.6 mm at this size
Nodes183 curve and line segments

Measured from the file. PNG: 2,000 × 1,600 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.79 in (25 × 20 mm)0.66 mm171 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.58 in (51 × 40 mm)1.3 mm342 mm30Vinyl, card and thin sheet
3 × 2.38 in (76 × 60 mm)2 mm513 mm12Vinyl, card and thin sheet
4 × 3.17 in (102 × 80 mm)2.6 mm684 mm6Vinyl, card and thin sheet
6 × 4.75 in (152 × 121 mm)4 mm1,026 mm2Any material, including 3 mm wood and acrylic
8 × 6.34 in (203 × 161 mm)5.3 mm1,368 mm1Any material, including 3 mm wood and acrylic
12 × 9.5 in (305 × 241 mm)7.9 mm2,051 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa SVG files

← Santa beard and moustache All 16 Santas Santa stuck in a chimney →