Free reindeer SVG

Tall reindeer antlers SVG

Tall reindeer antlers, as a solid black shape — Tall reindeer antlers. The preview is the SVG file itself.

A tall pair of antlers with five tines each, joined at the foot by a short bar so they cut and lift as one piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 80 mm (3.94 × 3.14 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	568 mm at this size
Narrowest part	3.9 mm at this size
Nodes	200 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,612 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.8 in (25 × 20 mm)	0.99 mm	144 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.6 in (51 × 41 mm)	2 mm	289 mm	30	Vinyl, card and thin sheet
3 × 2.39 in (76 × 61 mm)	3 mm	433 mm	12	Vinyl, card and thin sheet
4 × 3.19 in (102 × 81 mm)	4 mm	577 mm	6	Any material, including 3 mm wood and acrylic
6 × 4.79 in (152 × 122 mm)	5.9 mm	866 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.38 in (203 × 162 mm)	7.9 mm	1,154 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.58 in (305 × 243 mm)	12 mm	1,731 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More reindeer SVG files

← Reindeer antlers All 19 reindeer Simple reindeer antlers →