Free reindeer SVG

Reindeer monogram frame SVG

Reindeer monogram frame, as a solid black shape — Reindeer monogram frame. The preview is the SVG file itself.

An open ring wearing antlers and ears, with a round nose at the bottom. Drop an initial or a short name into the ring.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	77 × 100 mm (3.04 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	631 mm at this size
Narrowest part	4 mm at this size
Nodes	201 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,560 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.77 × 1 in (20 × 25 mm)	1 mm	160 mm	120	Vinyl, card and thin sheet
1.54 × 2 in (39 × 51 mm)	2 mm	321 mm	35	Vinyl, card and thin sheet
2.31 × 3 in (59 × 76 mm)	3 mm	481 mm	12	Any material, including 3 mm wood and acrylic
3.08 × 4 in (78 × 102 mm)	4.1 mm	641 mm	6	Any material, including 3 mm wood and acrylic
4.63 × 6 in (118 × 152 mm)	6.1 mm	962 mm	2	Any material, including 3 mm wood and acrylic
6.17 × 8 in (157 × 203 mm)	8.1 mm	1,282 mm	1	Any material, including 3 mm wood and acrylic
9.25 × 12 in (235 × 305 mm)	12 mm	1,923 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More reindeer SVG files

← Reindeer antlers with ornaments All 19 reindeer Reindeer face pieces for an ornament →