Free reindeer SVG

Reindeer head in a ring SVG

Reindeer head in a ring, as a solid black shape — Reindeer head in a ring. The preview is the SVG file itself.

Head, neck and antlers in profile inside a round frame, with an eye and a bell collar cut out. The ring holds every tine, so it is sturdy enough for a wooden ornament.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	981 mm at this size
Narrowest part	2.8 mm at this size
Nodes	190 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.71 mm	249 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	1.4 mm	498 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	2.1 mm	748 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	2.8 mm	997 mm	4	Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)	4.3 mm	1,495 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	5.7 mm	1,993 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	8.5 mm	2,990 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More reindeer SVG files

← Pair of flying reindeer All 19 reindeer Reindeer face with a round nose →