Free reindeer SVG

Reindeer face with a round nose SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Reindeer face with a round nose, as a solid black shape
Reindeer face with a round nose. The preview is the SVG file itself.

A reindeer seen from the front: antlers, leaf-shaped ears, two round eyes, a small smile and a big round nose cut as a hole. Put red card or vinyl behind the nose.

What is in the file

Size72 × 100 mm (2.83 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length658 mm at this size
Narrowest part1 mm at this size
Nodes222 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,460 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.72 × 1 in (18 × 25 mm)0.25 mm167 mm130Too fine for most machines
1.44 × 2 in (37 × 51 mm)0.51 mm334 mm35Fine detail: vinyl and paper only, weed with care
2.16 × 3 in (55 × 76 mm)0.76 mm501 mm15Fine detail: vinyl and paper only, weed with care
2.88 × 4 in (73 × 102 mm)1 mm669 mm6Vinyl, card and thin sheet
4.31 × 6 in (110 × 152 mm)1.5 mm1,003 mm2Vinyl, card and thin sheet
5.75 × 8 in (146 × 203 mm)2 mm1,337 mm2Vinyl, card and thin sheet
8.63 × 12 in (219 × 305 mm)3 mm2,006 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More reindeer SVG files

← Reindeer head in a ring All 19 reindeer Cute reindeer face →