Free reindeer SVG

Simple reindeer antlers SVG

Simple reindeer antlers, as a solid black shape — Simple reindeer antlers. The preview is the SVG file itself.

Short, thick antlers with two tines each on a curved band, like a party headband. No thin parts, so it works small.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 73 mm (3.94 × 2.87 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	490 mm at this size
Narrowest part	5.8 mm at this size
Nodes	161 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,479 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.73 in (25 × 19 mm)	1.5 mm	124 mm	130	Vinyl, card and thin sheet
2 × 1.46 in (51 × 37 mm)	2.9 mm	249 mm	35	Vinyl, card and thin sheet
3 × 2.19 in (76 × 56 mm)	4.4 mm	373 mm	15	Any material, including 3 mm wood and acrylic
4 × 2.92 in (102 × 74 mm)	5.9 mm	498 mm	6	Any material, including 3 mm wood and acrylic
6 × 4.37 in (152 × 111 mm)	8.8 mm	747 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.83 in (203 × 148 mm)	12 mm	996 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.75 in (305 × 222 mm)	18 mm	1,494 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More reindeer SVG files

← Tall reindeer antlers All 19 reindeer Reindeer antlers with ornaments →