Free reindeer SVG

Reindeer face pieces for an ornament SVG

Reindeer face pieces for an ornament, as a solid black shape
Reindeer face pieces for an ornament. The preview is the SVG file itself.

Antlers, two eyes and a round nose as loose pieces, laid out as a face. Stick them on a brown or clear bauble, a jar, a paper bag or a wood slice.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size84 × 100 mm (3.32 × 3.94 in), scales to any size
Pieces5 separate pieces
Outlines to cut5 outlines
Cut length462 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes98 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,700 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.84 × 1 in (21 × 25 mm)Over 1.5 mm117 mm110Vinyl, card and thin sheet
1.69 × 2 in (43 × 51 mm)Over 3 mm235 mm30Any material, including 3 mm wood and acrylic
2.53 × 3 in (64 × 76 mm)Over 4.6 mm352 mm12Any material, including 3 mm wood and acrylic
3.38 × 4 in (86 × 102 mm)Over 6.1 mm469 mm6Any material, including 3 mm wood and acrylic
5.06 × 6 in (129 × 152 mm)Over 9.1 mm704 mm2Any material, including 3 mm wood and acrylic
6.75 × 8 in (172 × 203 mm)Over 12 mm939 mm1Any material, including 3 mm wood and acrylic
10.13 × 12 in (257 × 305 mm)Over 18 mm1,408 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More reindeer SVG files

← Reindeer monogram frame All 19 reindeer Reindeer head silhouette →