Free reindeer SVG

Reindeer silhouette standing SVG

Reindeer silhouette standing, as a solid black shape — Reindeer silhouette standing. The preview is the SVG file itself.

A reindeer in profile with one foreleg lifted, a full pair of antlers and a short tail. Solid apart from the eye, so it cuts fast and reads from across a room.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	60 × 100 mm (2.35 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	553 mm at this size
Narrowest part	2.2 mm at this size
Nodes	283 curve and line segments

Measured from the file. PNG: 1,227 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.6 × 1 in (15 × 25 mm)	0.56 mm	140 mm	150	Fine detail: vinyl and paper only, weed with care
1.2 × 2 in (30 × 51 mm)	1.1 mm	281 mm	40	Vinyl, card and thin sheet
1.79 × 3 in (46 × 76 mm)	1.7 mm	421 mm	18	Vinyl, card and thin sheet
2.39 × 4 in (61 × 102 mm)	2.2 mm	562 mm	8	Vinyl, card and thin sheet
3.59 × 6 in (91 × 152 mm)	3.4 mm	843 mm	3	Any material, including 3 mm wood and acrylic
4.78 × 8 in (122 × 203 mm)	4.5 mm	1,124 mm	2	Any material, including 3 mm wood and acrylic
7.18 × 12 in (182 × 305 mm)	6.7 mm	1,686 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More reindeer SVG files

← Reindeer head silhouette All 19 reindeer Leaping reindeer →