Free reindeer SVG

Leaping reindeer SVG

Leaping reindeer, as a solid black shape
Leaping reindeer. The preview is the SVG file itself.

A reindeer in mid leap, forelegs tucked and hind legs stretched out behind, the way they are drawn pulling a sleigh. Tilted to climb.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size75 × 100 mm (2.93 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length522 mm at this size
Narrowest part2.3 mm at this size
Nodes282 curve and line segments

Measured from the file. PNG: 1,510 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.75 × 1 in (19 × 25 mm)0.58 mm133 mm120Fine detail: vinyl and paper only, weed with care
1.49 × 2 in (38 × 51 mm)1.2 mm265 mm35Vinyl, card and thin sheet
2.24 × 3 in (57 × 76 mm)1.8 mm398 mm15Vinyl, card and thin sheet
2.98 × 4 in (76 × 102 mm)2.3 mm530 mm6Vinyl, card and thin sheet
4.47 × 6 in (114 × 152 mm)3.5 mm796 mm2Any material, including 3 mm wood and acrylic
5.96 × 8 in (151 × 203 mm)4.7 mm1,061 mm1Any material, including 3 mm wood and acrylic
8.94 × 12 in (227 × 305 mm)7 mm1,591 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More reindeer SVG files

← Reindeer silhouette standing All 19 reindeer Christmas reindeer in harness →