Free reindeer SVG

Christmas reindeer in harness SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Christmas reindeer in harness, as a solid black shape
Christmas reindeer in harness. The preview is the SVG file itself.

A reindeer standing square and facing left, wearing a collar with a round bell, a girth strap and traces, all cut as slots. Ready to stand in front of a sleigh.

What is in the file

Size60 × 100 mm (2.35 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length651 mm at this size
Narrowest part1 mm at this size
Nodes321 curve and line segments

Measured from the file. PNG: 1,227 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.6 × 1 in (15 × 25 mm)0.25 mm165 mm150Too fine for most machines
1.2 × 2 in (30 × 51 mm)0.51 mm331 mm40Fine detail: vinyl and paper only, weed with care
1.79 × 3 in (46 × 76 mm)0.76 mm496 mm18Fine detail: vinyl and paper only, weed with care
2.39 × 4 in (61 × 102 mm)1 mm661 mm8Vinyl, card and thin sheet
3.59 × 6 in (91 × 152 mm)1.5 mm992 mm3Vinyl, card and thin sheet
4.78 × 8 in (122 × 203 mm)2 mm1,323 mm2Vinyl, card and thin sheet
7.18 × 12 in (182 × 305 mm)3 mm1,984 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More reindeer SVG files

← Leaping reindeer All 19 reindeer Reindeer outline →